VAL Avionics NAV 2000 Installationsanleitung PDF herunterladen (Seite 239)

SV-XPNDR-261/262 Installation, Configuration, and Testing

SkyView System Installation Guide - Revision R 11-21

To determine whether your transponder has an optional software update available for it, which

will require that it be labeled should you choose to update it:

1. Go to SETUP MENU > TRANSPONDER SETUP > (right click). If the STATUS line is yellow,

there is a software update available for the transponder.

2. Examine the STATUS line. Example:

ON LINE HW 22.03 FW 01.02 SW 02.02

The software version of the transponder follows the SW; in the example above the

software version is 2.02 (and thus, will be highlighted in yellow).

3. If STATUS is highlighted in yellow, and the version is earlier than 2.02, and you choose to

update the transponder, the new TSO authorization label must be applied concurrent

with updating the software. Go to

www.dynonavionics.com/transponder (PDF)

which provides a new TSO authorization label that you can print out, cut out, and apply

to the transponder.

4. Only after you have the label available, go to

SETUP MENU > TRANSPONDER SETUP > STATUS, press the LOAD button

and follow the instructions to update the software.

5. You must apply the new TSO authorization label before the transponder’s next use:

a. Cut out the label that is included in the printout from

www.dynonavionics.com/transponder (PDF).

b. Permanently affix the label to your physical SV-XPNDR-261/262 module. Do not

cover any existing labels.

c. Ensure that the method that you use to secure the label is durable. For example,

fully covering the label with transparent packing tape would satisfy this

requirement.

1 2 ... 234 235 236 237 238 239 240 241 242 243 244 ... 400 401

Keine Kommentare

VAL Avionics NAV 2000 Installationsanleitung Seite 239